Customs Tariff 

Chapter 72

Heading No.

Sub-heading No.

Description of article

 Unit Rate of duty

Standard

 Preferential Areas

(1)

(2)

(3)

 (4) (5) (6)
 I -PRIMARY MATERIALS; PRODUCT IN GRANULAR OR POWDER FORM
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
7201 10 00 -Non alloy pig iron containing by weight 0.5% or less of phosphorus kg 20% ....
7201 20 00 -Non alloy pig iron containing by weight more than 0.5% of phosphorus kg 20% ....
7201 50 - Alloy pig iron Spiegeleisen :
7201 50 10 -- Cast iron kg 20% ....
7201 50 90 -- Other kg 20% ....
7202 Ferro alloys
- Ferro manganese :
7202 11 00 -- Containing by weight more than 2% of carbon kg 20% ....
7202 19 00 -- Other kg 20% ....
-Ferro silicon :
7202 21 00 -- Containing by weight more than 55% of silicon kg 20% ....
7202 29 00 -- Other kg 20% ....
7202 30 00 Ferro silico manganese kg 20% ....
- Ferro chromium :
7202 41 00 -- Containing by weight more than 4% of carbon kg 20% ....
7202 49 00 -- Other kg 20% ....
7202 50 00 - Ferro silico chromium kg 20% ....
7202 60 00 - Ferro nickel kg 20% ....
7202 70 00 - Ferro-molybdenum kg 20% ....
7202 80 00 - Ferro tungsten and ferro-silico tungsten kg 20% ....
Other :
7202 91 00 -- Ferro titanium and ferro silico titanium kg 20% ....
7202 92 00 --Ferro-vanadium kg 20% ....
7202 93 00 --Ferro-niobium kg 20% ....
7202 99 -- Other :
-- Ferro-phosphorus, Ferro-selenium, Ferro-cobalt, Ferro-columbium, Ferro-zirconium, Ferro-tantalum:
7202 99 11 -- Ferro-phosphorous kg 20% ....
7202 99 12 -- Ferro-selenium kg 20% ....
7202 99 13 -- Ferro-cobalt kg 20% ....
7202 99 14 -- Ferro-columbium kg 20% ....
7202 99 15 -- Ferro-zirconium kg 20% ....
7202 99 16 -- Ferro-tantalum kg 20% ....
-- Ferro-silico-zirconium, Ferro-silico-magnesium :
7202 99 21 -- Ferro-silico-zirconium kg 20% ....
7202 99 22 -- Ferro-silico-magnesium kg 20% ....
-- Ferro-boron, charge-chrome :
7202 99 31 -- Ferro-boron kg 20% ....
7202 99 32 -- Charge-chrome kg 20% ....
7202 99 90 -- Other kg 20% ....
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94% in lumps, pellets or similar forms
7203 10 00 - Ferrous products obtained by direct reduction of iron ore kg 20% ....
7203 90 00 - Other kg 20% ....
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204 10 00 -Waste and scrap of cast iron kg 20% ....
- Waste and scrap of alloy steel :
7204 21 -- Of stainless steel :
7204 21 10 -- Empty or discharged cartridges of all bores and sizes kg 20% ....
7204 21 90 -- Other kg 20% ....
7204 29 -- Other :
7204 29 10 -- Empty or discharged cartridges of all bores and sizes kg 20% ....
7204 29 20 -- Of high speed steel kg 20% ....
7204 29 90 -- Other kg 20% ....
7204 30 00 - Waste and scrap of tinned iron or steel kg 20% ....
Other waste and scrap:
7204 41 00 Turnings, shavings, chips, milling waste, saw dust, fillings, trimmings and stampings, whether or not in bundles. kg 20% ....
7204 49 00 -- Other kg 20% ....
7204 50 00 Remelting scrap ingots kg 20% ....
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7205 10 - Granules :
-- Of iron :
7205 10 11 -- Shot and angular gift kg 20% ....
7205 10 12 -- Wire pellets kg 20% ....
7205 10 19 -- Other kg 20%
-- Of alloy steel :
7205 10 21 -- Shot and angular grit kg 20% ....
7205 10 22 -- Wire pellets kg 20% ....
7205 10 29 -- Other kg 20% ....
7205 10 90 -- Other kg 20% ....
- Powders :
7205 21 00 -- Of alloy steel kg 20%
7205 29 -- Other :
7205 29 10 -- Of iron kg 20% ....
7205 29 90 -- Other kg 20% ....
II - IRON & NON ALLOY STEEL
7206 Iron and non alloy steel in ingots or other primary forms (excluding iron of heading No. 7203)
7206 10 - Ingots :
7206 10 10 -- Of iron kg 20% ....
7206 10 20 -- Of high carbon steel kg 20% ....
7206 10 90 -- Other kg 20% ....
7206 90 - Other :
-- Of iron :
7206 90 11 -- Puddled bars and pilings kg 20% ....
7206 90 12 -- Blocks, lumps and similar forms kg 20% ....
7206 90 19 -- Other kg 20% ....
-- Other
7206 90 91 -- Puddled bars and pilings kg 20% ....
7206 90 92 -- Blocks, lumps and similar forms kg 20% ....
7206 90 99 -- Other kg 20% ....
7207 semi-finished product of iron or non-alloy steel
- Containing by weight less than 0.25% of carbon :
7207 11 -- Of rectangular (including square) cross section, the width measuring less than twice the thickness.
  7207 11 10 -- Electrical quality kg 20% ....
  7207 11 20 -- Forging quality kg 20% ....
  7207 11 30 -- Seamless steel tube quality kg 20% ....
  7207 11 90 -- Other kg 20% ....
7207 12 -- Other, of rectangular (other than square) cross section :
  7207 12 10 -- Electrical quality kg 20% ....
  7207 12 20 -- Forging quality kg 20% ....
  7207 12 30 -- Seamless steel tube quality kg 20% ....
  7207 12 90 -- Other kg 20% ....
7207 19 -- Other :
  7207 19 10 -- Forged blanks of non-alloy steel kg 20% ....
  7207 19 20 -- Mild steel billets kg 20% ....
  7207 19 90 -- Other kg 20% ....
7207 20 - Containing by weight 0.25% or more of carbon :
  7207 20 10 -- Forging quality kg 20% ....
  7207 20 20 -- Spring steel quality kg 20% ....
  7207 20 30 -- Seamless steel tube  quality kg 20% ....
  7207 20 90 -- Other kg 20% ....
7208 Flat rolled products of iron or non alloy steel, of a width of 600 mm or more, hot rolled, not clad, plated or coated
  7208 10 00 -In coils, not further worked than hot rolled, with patterns in relief kg 20% ....
-Other, in coils, not further worked than hot rolled, pickled :
7208 25 -- Of a thickness of 4.75mm. or more :
  7208 25 10 -- Plates kg 20% ....
  7208 25 20 -- Universal plates kg 20% ....
  7208 25 30 -- Sheets kg 20% ....
  7208 25 40 -- Strip kg 20% ....
  7208 25 90 -- Other kg 20% ....
7208 26 -- Of a thickness of 3 mm or more but less than 4.75 mm :
  7208 26 10 -- Plates kg 20% ....
  7208 26 20 -- Universal plates kg 20% ....
  7208 26 30 -- Sheets kg 20% ....
  7208 26 40 -- Strip kg 20% ....
  7208 26 90 -- Other kg 20% ....
7208 27 -- Of a thickness of less than 3 mm :
  7208 27 10 -- Plates kg 20% ....
  7208 27 20 -- Universal plates kg 20% ....
  7208 27 30 -- Sheets kg 20% ....
  7208 27 40 -- Strip kg 20% ....
  7208 27 90 -- Other kg 20% ....
- Other, in coils not further worked than hot rolled :
7208 36 -- Of a thickness exceeding 10 mm :
  7208 36 10 -- Plates kg 20% ....
  7208 36 20 -- Universal plates kg 20% ....
  7208 36 30 -- Sheets kg 20% ....
  7208 36 40 -- Strip kg 20% ....
  7208 36 90 -- Other kg 20% ....
7208 37 -- Of a thickness of 4.75 mm or more but not exceeding 10 mm :
  7208 37 10 -- Plates kg 20% ....
  7208 37 20 -- Universal plates kg 20% ....
  7208 37 30 -- Sheets kg 20% ....
  7208 37 40 -- Strip kg 20% ....
  7208 37 90 -- Other kg 20% ....
7208 38 -- Of a thickness of 3 mm or more but less than 4.75 mm :
  7208 38 10 -- Plates kg 20% ....
  7208 38 20 -- Universal plates kg 20% ....
  7208 38 30 -- Sheets kg 20% ....
  7208 38 40 -- Strip kg 20% ....
  7208 38 90 -- Other kg 20% ....
7208 39 -- Of a thickness of less than 3 mm :
  7208 39 10 -- Plates kg 20% ....
  7208 39 20 -- Universal plates kg 20% ....
  7208 39 30 -- Sheets kg 20% ....
  7208 39 40 -- Strip kg 20% ....
  7208 39 90 -- Other kg 20% ....
7208 40   - Not in coils, not further worked than hotrolled, with patterns in relief :      
  7208 40 10 -- Plates kg 20% ....
  7208 40 20 -- Universal plates kg 20% ....
  7208 40 30 -- Sheets kg 20% ....
  7208 40 40 -- Strip kg 20% ....
  7208 40 90 -- Other kg 20% ....
Other, not in coils, not further worked than hot rolled :
7208 51 -- Of a thickness exceeding 10 mm :      
  7208 51 10 -- Plates kg 20% ....
  7208 51 20 -- Universal plates kg 20% ....
  7208 51 30 -- Sheets kg 20% ....
  7208 51 40 -- Strip kg 20% ....
  7208 51 90 -- Other kg 20% ....
7208 52 -- Of a thickness of 4.75 mm or more but not exceeding 10 mm :
  7208 52 10 -- Plates kg 20% ....
  7208 52 20 -- Universal plates kg 20% ....
  7208 52 30 -- Sheets kg 20% ....
  7208 52 40 -- Strip kg 20% ....
  7208 52 90 -- Other kg 20% ....
7208 53 -- Of a thickness of 3 mm or more but less than 4.75 mm :
  7208 53 10 -- Plates kg 20% ....
  7208 53 20 -- Universal plates kg 20% ....
  7208 53 30 -- Sheets kg 20% ....
  7208 53 40 -- Strip kg 20% ....
  7208 53 90 -- Other kg 20% ....
7208 54 -- Of a thickness of less than 3 mm :
  7208 54 10 -- Plates kg 20% ....
  7208 54 20 -- Universal plates kg 20% ....
  7208 54 30 -- Sheets kg 20% ....
  7208 54 40 -- Strip kg 20% ....
  7208 54 90 -- Other kg 20% ....
  7208 90 00 - Other kg 20% ....
7209 Flat rolled products of iron or non alloy steel, of a width of 600 mm or more, cold rolled (cold reduced), not clad, plated or coated
-In coils, not further worked than cold rolled (cold reduced) :
7209 15 -- Of a thickness of 3 mm or more :
  7209 15 10 -- Plates kg 20% ....
  7209 15 20 -- Sheets kg 20% ....
  7209 15 30 -- Strip kg 20% ....
  7209 15 90 -- Other kg 20% ....
7209 16 -- Of a thickness exceeding 1 mm but less than 3 mm :
  7209 16 10 -- Plates kg 20% ....
  7209 16 20 -- Sheets kg 20% ....
  7209 16 30 -- Strip kg 20% ....
  7209 16 90 -- Other kg 20% ....
7209 17 -- Of a thickness of 0.5 mm or more but not exceeding 1 mm :
  7209 17 10 -- Plates kg 20% ....
  7209 17 20 -- Sheets kg 20% ....
  7209 17 30 -- Strip kg 20% ....
  7209 17 90 -- Other kg 20% ....
7209 18   -- Of a thickness of less than 0.5 mm :      
  7209 18 10 -- Plates kg 20% ....
  7209 18 20 -- Sheets kg 20% ....
  7209 18 30 -- Strip kg 20% ....
  7209 18 90 -- Other kg 20% ....
- Not in coils, not further worked than cold rolled (cold reduced):
7209 25 -- Of a thickness of 3 mm or more :
  7209 25 10 -- Plates kg 20% ....
  7209 25 20 -- Sheets kg 20% ....
  7209 25 30 -- Strip kg 20% ....
  7209 25 90 -- Other kg 20% ....
7209 26 -- Of a thickness exceeding 1 mm but less than 3 mm :
  7209 26 10 -- Plates kg 20% ....
  7209 26 20 -- Sheets kg 20% ....
  7209 26 30 -- Strip kg 20% ....
  7209 26 90 -- Other kg 20% ....
7209 27 -- Of a thickness of 0.5 mm or more but not exceeding 1 mm :      
  7209 27 10 -- Plates kg 20% ....
  7209 27 20 -- Sheets kg 20% ....
  7209 27 30 -- Strip kg 20% ....
  7209 27 90 -- Other kg 20% ....
7209 28 -- Of a thickness of less than 0.5 mm :
  7209 28 10 -- Plates kg 20% ....
  7209 28 20 -- Sheets kg 20% ....
  7209 28 30 -- Strip kg 20% ....
  7209 28 90 -- Other kg 20% ....
  7209 90 00 - Other kg 20% ....
7210 Flat rolled products of iron or non alloy steel, of a width of 600 mm or more, clad, plated or coated
- Plated or coated with tin :
7210 11 -- Of a thickness of 0.5 mm or more :
  7210 11 10 -- OTS/MR Type kg 20% ....
  7210 11 90 -- Other kg 20% ....
7210 12 -- Of a thickness of less than 0.5 mm :
  7210 12 10 -- OTS/MR Type kg 20% ....
  7210 12 90 -- Other kg 20% ....
  7210 20 00 - Plated or coated with lead, including time plate kg 20% ....
7210 30 - Electrolytically plated or coated with zinc :
  7210 30 10 -- Corrugated kg 20% ....
  7210 30 90 -- Other kg 20% ....
- Otherwise plated or coated with zinc :
  7210 41 00 -- Corrugated kg 20% ....
  7210 49 00 Other  kg 20% ....
  7210 50 00 - Plated or coated with chromium oxides or with chromium and chromium oxides kg 20% ....
- Plated or coated with aluminum :
  7210 61 00 -- Plated or coated with aluminium-zinc alloys kg 20% ....
  7210 69 00 -- Other kg 20% ....
  7210 70 00 - Painted, varnished or coated with plastics kg

 20%
7210 90 - Other :
  7210 90 10 -- Lacquered kg 20% ....
  7210 90 90 -- Other kg 20% ....
7211   Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated      
    - Not further worked than hot-rolled :      
  7211 13 00 -- Rolled on four faces or in a closed box pass, of width exceeding 150 mm and a thickness of not less than 4 mm , not in coils and without patterns in relief kg 20%  
7211 14   -- Other, of a thickness of 4.75 mm or more :      
  7211 14 10 -- Flats kg 20% ....
  7211 14 20 -- Universal plates kg 20% ....
  7211 14 30 -- Hoops kg 20% ....
  7211 14 40 -- Sheets kg 20% ....
  7211 14 50 -- Strip kg 20% ....
  7211 14 60 -- Skelp kg 20% ....
  7211 14 90 -- Other kg 20% ....
7211 19   -- Other :
  7211 19 10 -- Flats kg 20% ....
  7211 19 20 -- Universal plates kg 20% ....
  7211 19 30 -- Hoops kg 20% ....
  7211 19 40 -- Sheets kg 20% ....
  7211 19 50 -- Strip kg 20% ....
  7211 19 60 -- Skelp kg 20% ....
  7211 19 90 -- Other kg 20% ....
    Not further worked than cold-rolled (cold- reduced):      
7211 23   -- Containing by weight less than 0.25% of carbon :
  7211 23 10 -- Flats kg 20% ....
  7211 23 20 -- Universal plates kg 20% ....
  7211 23 30  -- Hoops kg 20% ....
  7211 23 40 -- Sheets kg 20% ....
  7211 23 50 -- Strip kg 20% ....
  7211 23 90 -- Other kg 20% ....
7211 29   -- Other :
  7211 29 10 -- Flats kg 20% ....
  7211 29 20 -- Universal plates kg 20% ....
  7211 29 30 -- Hoops kg 20% ....
  7211 29 40 -- Sheets kg 20% ....
  7211 29 50 -- Strip kg 20% ....
  7211 29 60 -- Skelp kg 20% ....
  7211 29 90 -- Other kg 20% ....
7211 90 - Other :      
    -- Universal plates :      
  7211 90 11 -- Of boiler quality kg 20% ....
  7211 90 12 -- Of high tensile quality kg 20% ....
  7211 90 13 -- Of ship building quality kg 20% ....
  7211 90 90 -- Other kg 20% ....
7212   Flat-rolled products of iron or no-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212 10   - Plated or coated with tin :
  7212 10 10 -- OTS or MR type kg 20% ....
  7212 10 90 -- Other kg 20% ....
7212 20   - Electrolytically plated or coated with zinc :      
  7212 20 10 -- Corrugated kg 20% ....
  7212 20 90 -- Other kg 20% ....
7212 30   - Otherwise plated or coated with Zinc :      
  7212 30 10 -- Corrugated kg 20% ....
  7212 30 90 -- Other kg 20% ....
  7212 40 00 - Painted, varnished or coated with plastics kg 20% ....
7212 50   - Otherwise plated or coated :      
  7212 50 10 -- Plated or coated with lead kg 20% ....
  7212 50 20 -- Lacquered kg 20% ....
  7212 50 90 -- Other kg 20% ....
  7212 60 00 -- Clad kg 20% ....
7213   Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213 10   - Containing indentations, ribs, grooves or other deformations produced during the rolling process :
  7213 10 10 -- Of free cutting steel kg 20% ....
  7213 10 90 -- Other kg 20% ....
7213 20   - Other of free-cutting steel :
  7213 20 10 -- Electrode quality kg 20% ....
  7213 20 20 -- Cold heading quality kg 20% ....
  7213 20 90 -- Other kg 20% ....
    other      
7213 91   -- Of circular cross-section measuring less than 14 mm in diameter :
  7213 91 10 -- Electrode quality kg 20% ....
  7213 91 20 -- Cold heading quality kg 20% ....
  7213 91 90 -- Other kg 20% ....
7213 99   -- Other :
7213 99 10 -- Electrode quality kg 20% ....
  7213 99 20 -- Cold heading quality kg 20% ....
  7213 99 90 -- Other kg 20% ....
7214   Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled,  hot-drawn or hot extruded, but including those twisted after rolling
7214 10   - Forged :
  7214 10 10 -- Spring steel quality kg 20% ....
  7214 10 90 -- Other kg 20% ....
7214 20   - Containing indentations , ribs,  grooves or other deformations produced during the rolling process or twisted after rolling :
  7214 20 10 -- Spring steel quality kg 20% ....
  7214 20 90 -- Other kg 20% ....
  7214 30 00 - Other, of free cutting steel kg 20% ....
  -  Other :
7214 91   -- Of rectangular  (other than square) cross-section :      
  7214 91 10 -- Mild steel bright bar kg 20% ....
  7214 91 90 -- Other kg 20% ....
7214 99   -- Other :      
  7214 99 10 -- Of spring steel quality kg 20% ....
  7214 99 90 -- Other kg 20% ....
7215   Other bars and rods of iron or non-alloy steel      
  7215 10 00 - Of  free-cutting steel, not further worked than cold-formed or cold-finished kg 20% ....
7215 50   - Other, not further worked than cold-formed or cold-finished :      
  7215 50 10 -- Mild steel bright bar kg 20% ....
  7215 50 90 -- Other kg 20% ....
7215 90   - Other :      
  7215 90 10 -- Plated or coated with zinc kg 20% ....
  7215 90 20 -- Plated or coated with other base metals kg 20% ....
  7215 90 90 -- Other kg 20% ....
7216   Angles, shapes and sections of iron or non-alloy steel      
  7216 10 00 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm kg 20% ....
    - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm :      
   7216 21 00 - L sections  kg 20%  ---
  7216 22 00 -- T sections kg 20% ....
    - U , I or H sections, not further worked than hot-rolled, hot-drawn or extruded of height of 80 mm or more :      
  7216 31 00 -- U sections kg 20% ....
  7216 32 00 -- I sections kg 20% ....
  7216 33 00 -- H sections kg 20% ....
  7216 40 00 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more kg 20% ....
  7216 50 00 - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded kg 20% ....
    - Angles, shapes and sections, not further worked than  cold-formed or cold-finished :      
  7216 61 00 -- Obtained from flat-rolled products kg 20% ....
  7216 69 00 -- Other kg 20% ....
    - Other :      
  7216 91 00 -- Cold-formed or cold-finished from flat rolled products kg 20% ....
7216 99   -- Other :      
  7216 99 10 -- Plated or coated with zinc kg 20% ....
  7216 99 20 -- Plated or coated with base metals other than zinc kg 20% ....
  7216 99 30 -- Slotted angles and slotted channels kg 20% ....
  7216 99 40 -- Forged kg 20% ....
  7216 99 90 -- Other kg 20% ....
7217   Wire of iron or non-alloy steel      
7217 10   - Not plated or coated, whether or not polished :      
  7217 10 10 -- Of a thickness of 18 SWG and below kg 20% ....
  7217 10 20 -- Of a thickness above 18 SWG but up to 26 SWG kg 20% ....
  7217 10 30 -- Of a thickness above 26 SWG kg 20% ....
7217 20   - Plated or coated with zinc :      
  7217 20 10 -- Of a thickness of 18 SWG and below kg 20% ....
  7217 20 20 -- Of a thickness above 18 SWG but up to 26 SWG kg 20% ....
  7217 20 30 -- Of a thickness above 26 SWG kg 20% ....
7217 30   - Plated or coated with other base materials :      
  7217 30 10 -- Of a thickness of 18 SWG and below kg 20% ....
  7217 30 20 -- Of a thickness above 18 SWG but up to 26 SWG kg 20% ....
  7217 30 30 -- Of a thickness above 26 SWG kg 20% ....
7217 90   - Other :      
    -- Shaped and profiled wire :      
  7217 90 11 -- Of cross section-half round kg 20% ....
  7217 90 12 -- Of cross section-flat and rectangular kg 20% ....
  7217 90 13 -- Of cross section-'z' shaped kg 20% ....
  7217 90 19 -- Of cross section-other shapes kg 20% ....
    -- Other :      
  7217 90 91 -- High tensile quality kg 20% ....
  7217 90 92 -- Electrode quality kg 20% ....
  7217 90 93 -- Electric resistance wire (including electric resistance heating wire) kg 20% ....
  7217 90 99 -- Other kg 20% ....
 III - STAINLESS STEEL
7218   Stainless steel in ingots or other primary forms; semi-finished products of stainless steel      
  7218 10 00 - Ingots and other primary forms kg 20% ....
    - Other :      
  7218 91 00 -- Of rectangular (other than square) cross-section kg 20% ....
7218 99   -- Other :      
  7218 99 10 -- Billets kg 20% ....
  7218 99 90 -- Other kg 20% ....
7219   Flat-rolled products of stainless steel, of a width of 600 mm or more      
    - Not further worked than hot-rolled, in coils :      
7219 11   -- Of a thickness exceeding 10 mm :
    -- Chromium type :      
  7219 11 11 -- Not exceeding 14 mm kg 20% ....
  7219 11 12 -- Exceeding 14 mm kg 20% ....
  7219 11 90 other kg 20%  
  7219 12 00 -- Of a thickness of 4.75 mm or more but not exceeding 10 mm kg 20% ....
  7219 13 00 -- Of a thickness of 3 mm or more but less than 4.75 mm kg 20% ....
  7219 14 00 -- Of a thickness of less than 3 mm kg 20% ....
    - Not further worked than hot-rolled, not in coils :      
7219 21 -- Of a thickness exceeding 10 mm :
-- Universal plates of stainless steel or heat resisting  steel and chromium type :
7219 21 11 -- Not exceeding 14 mm kg 20% ....
7219 21 12 -- Exceeding 14 mm kg 20% ....
-- Universal plates of stainless steel heat resisting steel, nickel  chromium austenitic type :
7219 21 21 -- Not exceeding 14 mm kg 20% ....
7219 21 22 -- Exceeding 14 mm kg 20% ....
-- Other chromium type :
7219 21 31 -- Not exceeding 14 mm kg 20% ....
7219 21 32 -- Exceeding 14 mm kg 20% ....
-- Other nickel chromium austenitic type :
7219 21 41 -- Not exceeding 14 mm kg 20% ....
7219 21 42 -- Exceeding 14 mm kg 20% ....
7219 21 90 -- Other kg 20% ....
7219 22 -- Of a thickness of 4.75 mm or more but not exceeding 10 mm :
    universal plates of stainless steel or heat resisting steel:      
7219 22 11 -- Chromium type kg 20% ....
7219 22 12  -- Nickel chromium austenitic type kg 20% ....
7219 22 19 -- Other kg 20% ....
-- Other :
7219 22 91 -- Chromium type kg 20% ....
7219 22 92 -- Nickel chromium austenitic type kg 20% ....
  7219 22 99 other kg 20%  
7219 23 -- Of a thickness of 3 mm or more but less than 4.75 mm :
7219 23 10 -- Chromium type kg 20% ....
7219 23 20 -- Nickel chromium austenitic type kg 20% ....
7219 23 90 -- Other kg 20% ....
7219 24 -- Of a thickness of less than 3 mm :
    chromium type, of a thickness      
7219 24 11 -- Below 0.35 mm kg 20% ....
7219 24 12 -- 0.35mm and above but below 0.56 mm kg 20% ....
7219 24 13 --0.56 mm and above but below 0.90 mm kg 20% ....
7219 24 19 -- Other kg 20% ....
-- Nickel chromium austenitic type of a thickness :
7219 24 21 -- Below 0.35 mm  kg 20% ....
7219 24 22 -- 0.35 mm and above but below 0.56 mm kg 20% ....
7219 24 23 -- 0.56 mm and above but below 0.90 mm kg 20% ....
7219 24 29 -- Other kg 20% ....
7219 24 90 -- Other kg 20% ....
-- Not further worked than cold-rolled (cold reduced) :
7219 31 -- Of a thickness of 4.75 mm or more :
-- Chromium type :
7219 31 11 -- Not exceeding 14 mm kg 20% ....
7219 31 12 -- Exceeding 14 mm kg 20% ....
-- Nickel chromium austenitic type :
7219 31 21 -- Not exceeding 14 mm kg 20% ....
7219 31 22 -- Exceeding 14 mm kg 20% ....
7219 31 90 -- Other kg 20% ....
7219 32 -- Of thickness of 3 mm or more but less than 4.75 mm :
7219 32 10 -- Chromium type kg 20% ....
7219 32 20 -- Nickel chromium austenitic type kg 20% ....
7219 32 90 -- Other kg 20% ....
7219 33 -- Of a thickness exceeding 1 mm but less than 3 mm :
7219 33 10 -- Chromium type kg 20% ....
7219 33 20 -- Nickel chromium  austenitic type kg 20% ....
7219 33 90 -- Other kg 20% ....
7219 34 -- Of a thickness of 0.5 mm or more but not exceeding 1 mm :
7219 34 10 -- Chromium type kg 20% ....
7219 34 20 -- Nickel chromium austenitic type kg 20% ....
7219 34 90 -- Other kg 20% ....
7219 35 -- Of a thickness of less than 0.5 mm :
7219 35 10 -- Chromium type kg 20% ....
7219 35 20 -- Nickel chromium austenitic type kg 20% ....
7219 35 90 -- Other kg 20% ....
7219 90 -- Other :
-- Sheets and plates : kg 20% ....
7219 90 11 -- Thickness more than 4.75 mm kg 20% ....
7219 90 12 -- Thickness 3 mm to 4.75 mm kg 20% ....
7219 90 13 -- Thickness less than 3 mm kg 20% ....
7219 90 90 -- Other kg 20% ....
7220 Flat rolled products of stainless steel, of a width of less than 600 mm
- Not further worked than hot-rolled :
7220 11 -- Of a thickness of 4.75 mm or more :
7220 11 10   -- Skelp for pipes and tubes kg 20% ....
-- Strips for pipes and tubes (other than skelp) :
7220 11 21 -- Chromium type kg 20% ....
7220 11 22 -- Nickel chromium austenitic type kg 20% ....
7220 11 29 -- Other kg 20% ....
7220 11 90 -- Other kg 20% ....
7220 12 -- Of a thickness of less than 4.75 mm :
7220 12 10 -- Skelp for pipes and tubes kg 20% ....
-- Strips for pipes and tubes (other than  skelp) :
7220 12 21 -- Chromium type kg 20% ....
7220 12 22 -- Nickel chromium austenitic type kg 20% ....
7220 12 29 -- Other kg 20% ....
7220 12 90 -- Other kg 20% ....
7220 20 - Not further worked than cold rolled (cold reduced) :
7220 20 10 -- Skelp for pipes and tubes  kg 20% ....
-- Strips for pipes and tubes (other than skelp) :
7220 20 21 -- Chromium type kg 20% ....
7220 20 22 -- Nickel chromium austenitic type kg 20% ....
7220 20 29 -- Other kg 20% ....
7220 20 90 -- Other kg 20% ....
7220 90 - Other :
7220 90 10 -- Skelp (strips for pipes and tubes) kg 20% ....
-- Strips for pipes and tubes (other than skelp) :
7220 90 21 -- Chromium type kg 20% ....
7220 90 22 -- Nickel chromium austenitic type kg 20% ....
7220 90 29 -- Other kg 20% ....
7220 90 90 -- Other kg 20% ....
7221 Bars and rods, hot rolled, in irregularly wound coils, of stainless steel
7221 00 - Bars and rods,  hot-rolled in irregularly wound coils, of stainless steel :
-- Bright bars :
7221 00 11 -- Chromium type kg 20% ....
7221 00 12 -- Nickel chromium austenitic type kg 20% ....
7221 00 19 -- Other kg 20% ....
7221 00 90 -- Other kg 20% ....
7222   Other bars and rods of stainless steel; angles, shapes and sections of stainless steel      
- Bars and rods, not further worked than hot rolled, hot drawn or extruded .
7222 11 -- Of circular cross section :
-- Bright bars :
7222 11 11 -- Chromium type kg 20% ....
7222 11 12 -- Nickel chromium austenitic type kg 20% ....
7222 11 19 -- Other kg 20% ....
-- Other :
7222 11 91 -- Chromium type kg 20% ....
7222 11 92 -- Nickel chromium austenitic type kg 20% ....
7222 11 99 -- Other kg 20% ....
7222 19 -- Other :
    bright bars:      
7222 19 11 -- Chromium type kg 20% ....
7222 19 12 -- Nickel chromium austenitic type kg 20% ....
7222 19 19 -- Other kg 20% ....
-- Other :
7222 19 91 -- Chromium type kg 20% ....
7222 19 92 -- Nickel chromium austenitic type kg 20% ....
7222 19 99 -- Other kg 20% ....
7222 20 -Bars and rods, not further worked than cold formed or cold finished :
-- Bright bars : ....
7222 20 11 -- Chromium type kg 20% ....
7222 20 12 -- Nickel chromium austenitic type kg 20% ....
7222 20 19 -- Other kg 20% ....
-- Other :
7222 20 91 -- Chromium type kg 20% ....
7222 20 92 -- Nickel chromium austenitic type kg 20% ....
7222 20 99 -- Other kg 20% ....
7222 30 - Other bars and rods :
- Bright bars :
7222 30 11 -- Chromium type kg 20% ....
7222 30 12 -- Nickel chromium austenitic type kg 20% ....
7222 30 19 -- Other kg 20% ....
-- Other :
7222 30 91 -- Chromium type kg 20% ....
7222 30 92 -- Nickel chromium austenitic type kg 20% ....
7222 30 99 -- Other kg 20% ....
7222 40 - Angles, shapes and sections :
7222 40 10 -- Of thickness of 80 mm and above kg 20% ....
7222 40 90 -- Of below 80 mm kg 20% ....
7223 Wire of stainless steel
7223 00 -- Wire of stainless steel:
7223 00 10 -- Electrode quality kg 20% ....
-- Other :
7223 00 91 -- Of thickness of above 1.5 mm kg 20% ....
7223 00 92 -- Of thickness of 0.46 mm and above but not exceeding 1.5 mm kg 20% ....
7223 00 99 -- Of thickness of below 0.46 mm kg 20% ....
 IV - OTHER ALLOY STEEL; HOLLOW DRILL BARS & RODS, OF ALLOY OR NON-ALLOY STEEL
7224   Other alloy steel in ingots or other primary forms; semi finished products of other alloy steel      
7224 10 00 - Ingots and other primary forms kg 20% ....
7224 90 - Other :
7224 90 10 -- Of tool steel quality kg 20% ....
7224 90 20 -- Of die steel quality kg 20% ....
7224 90 30 -- Of cobalt bearing high speed steel quality kg 20% ....
7224 90 40 -- Forged blanks of alloy steel kg 20% ....
-- Other :
7224 90 91 -- Billets kg 20% ....
7224 90 99 -- Other kg 20% ....
7225 Flat rolled products of other alloy steel, of a width of 600 mm or more
- Of silicon electrical steel :
7225 11 00 Grain-oriented kg 20% ....
7225 19 00 -- Other kg 20% ....
7225 20 - Of high speed steel :
-- Hot-rolled :
1Omitted[7225 20 11 -- In coils kg 20% ....
7225 20 19 -- Not in coils kg 20% ....
-- Cold-rolled :
7225 20 21 -- In coils kg 20% ....
7225 20 29 -- Not in coils kg 20% ....]
7225 30 - Other, not further worked than hot rolled in coils :
7225 30 10 -- Of spring steel quality kg 20% ....
7225 30 90 -- Other kg 20% ....
7225 40 - Other, not further worked than hot rolled not in coils :
-- Of a thickness of above 4.75 mm :
7225 40 11 -- Boiler quality kg 20% ....
7225 40 12 -- Pressure vessel quality kg 20% ....
7225 40 13 -- High tensile quality kg 20% ....
7225 40 19 -- Other kg 20% ....
7225 40 20 -- Of at thickness of 3 mm and above but not exceeding 4.75 mm kg 20% ....
7225 40 30 -- Of a thickness of below 3 mm kg 20% ....
7225 50 - Other, not further worked than cold rolled (cold reduced) :
7225 50 10 -- Of a thickness of less than 3 mm kg 20% ....
7225 50 20 -- Of a thickness of 3 mm to 4.75 mm kg 20% ....
7225 50 30 -- Of a thickness of above 4.75 mm kg 20% ....
- Other :
7225 91 00 -- Electricolytically plated or coated with zinc kg 20% ....
7225 92 00 -- Otherwise plated or coated with zinc kg 20% ....
7225 99 00 - Other kg 20% ....
7226 Flat rolled products of other alloy steel, of a width of less than 600 mm
- Of silicon electrical steel :
7226 11 00 --Grain-oriented kg 20% ....
7226 19 00 -- Other kg 20% ....
7226 20 - Of high speed steel :
-- Hot-rolled :
7226 20 11 -- In coils kg 20% ....
7226 20 12 -- Other kg 20% ....
-- Cold rolled :
7226 20 21 -- In coils kg 20% ....
7226 20 22 -- Other kg 20% ....
7226 20 30 -- Hoops and strips kg 20% ....
- Other :
7226 91 -- Not further worked than hot rolled :
7226 91 10 -- Of a thickness of below 3 mm kg 20% ....
7226 91 20 -- Of a thickness of 3 mm and above but not exceeding 4.75 mm kg 20% ....
7226 91 30 -- High tensile quality of a thickness of above 4.75 mm kg 20% ....
7226 91 90 -- Other kg 20% ....
7226 92 -- Not further worked than cold rolled (cold reduced) :
7226 92 10 -- Of a thickness of below 3 mm kg 20% ....
7226 92 20 -- Of a thickness of 3 mm and above but not exceeding 4.75 mm kg 20% ....
7226 92 30 -- Of a thickness of above 4.75 mm kg 20% ....
1Omitted[7226 93 00 -- Electrolytically plated or coated with zinc kg 20% ....
  7226 94 00 otherwise plated or coated with zinc kg 20%  ....]
7226 99 -- Other :
7226 99 10 -- Of thickness of above 4.75 mm kg 20% ....
7226 99 20 -- Of a thickness of above 3 mm and but not exceeding 4.75 mm kg 20% ....
7226 99 30 -- Of a thickness  of below 3 mm kg 20% ....
7226 99 40 -- Skelp (strips for pipes and tubes) kg 20% ....
-- Hoops and strips :
7226 99 51 -- Hot rolled kg 20% ....
7226 99 52 -- Cold rolled kg 20% ....
7226 99 53 -- Of spring steel, other than skelp kg 20% ....
7226 99 60 -- Skelps and strips for razor blades and saw blades kg 20% ....
7226 99 90 -- Other kg 20% ....
7227 Bars and rods, hot rolled, in irregularly wound coils, of other alloy steel
7227 10 00 - Of high speed steel kg 20% ....
7227 20 00 - Of silico manganese steel kg 20% ....
7227 90 - Other :
7227 90 10 -- Valve spring steel quality kg 20% ....
7227 90 20 -- Other springs steel quality kg 20% ....
7227 90 30 -- Ball bearing quality kg 20% ....
7227 90 40 -- Cold heading quality kg 20% ....
7227 90 50 -- Lead-free cutting quality kg 20% ....
7227 90 60 -- Sulphur free cutting quality kg 20% ....
7227 90 90 -- Other kg 20% ....
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non alloy steel
7228 10 - Bars and rods, of high speed steel :
7228 10 10 -- Bright bars kg 20% ....
7228 10 90 -- Other kg 20% ....
7228 20 00 -Bars and rods,of silico manganese steel kg 20% ....
7228 30 - Other bars and rods, not further worked than hot rolled, hot drawn or extruded :
-- Bright bars :
7228 30 11 -- Of alloy tool steel kg 20% ....
7228 30 19 -- Other kg 20% ....
-- Other :
7228 30 21 -- Lead bearing steel kg 20% ....
7228 30 22 - Spring steel kg 20% ....
7228 30 23 - Sulphur bearing steel kg 20% ....
7228 30 24 - Tool and die steel kg 20% ....
7228 30 29 -- Other kg 20% ....
7228 40 00 - Other bars and rods, not further worked than forged kg 20% ....
7228 50 - Other bars and rods, not further worked than cold formed or cold finished :
7228 50 10 -- Of engine valves and cold heading steel kg 20% ....
7228 50 90 -- Other kg 20% ....
7228 60 - Other bars and rods
-- Bright bars :
7228 60 11 -- Of alloy tool steel kg 20% ....
7228 60 12 -- Other kg 20% ....
-- Other :
7228 60 91 -- Lead bearing steel kg 20% ....
7228 60 92 -- Spring steel kg 20% ....
7228 60 93 -- Sulphur bearing steel kg 20% ....
7228 60 94 -- Tool and die steel kg 20% ....
7228 60 99 -- Other kg 20% ....
7228 70 - Angles, shapes and sections :
-- Not further worked than hot-rolled, hot-drawn or extruded :
7228 70 11 -- Of 80 mm or more kg 20% ....
7228 70 12 -- Of less than 80 mm kg 20% ....
-- Not further worked than cold-formed or cold finished :
7228 70 21 -- Of 80 mm more kg 20% ....
7228 70 22 -- Of less than 80 mm kg 20% ....
7228 80 - Hollow drill bars and rods :
7228 80 10 -- Of alloy steel kg 20% ....
7228 80 20 -- Of non alloy steel, forged kg 20% ....
7228 80 90 -- Other kg 20% ....
7229 Wire of other alloy steel
1Omitted[7229 10 00 - Of high speed steel kg 20% ....]
7229 20 00 - Of silico manganese steel kg 20% ....
7229 90 - Other :
-- Tinned wire, bronze coated wire, trapezoidal wire, half round wire, crimped wire and copper coated wire, not insulated :
7229 90 11 -- Tinned wire kg 20% ....
7229 90 12 -- Bronze coated wire kg 20% ....
7229 90 13 -- Trapezoidal wire kg 20% ....
7229 90 14 -- Half round wire kg 20% ....
7229 90 15 -- Crimped wire kg 20% ....
7229 90 16 - Copper coated wire kg 20% ....
-- Electrode quality, wire rope quality and ACSR quality not insulated :
7229 90 21 -- Electrode quality kg 20% ....
7229 90 22 -- Wire rope quality kg 20% ....
7229 90 23 -- ACSR quality kg 20% ....
-- Wire (excluding wire type lead), spring, high tensile, hardened and tempered wires, not insulated :
7229 90 31 -- Wire (excluding wire type lead) kg 20% ....
7229 90 32 -- Spring wire kg 20% ....
7229 90 33 -- High tensile wire kg 20% ....
7229 90 34 -- Hardened and tempered wire kg 20% ....
7229 90 40 -- Other wire kg 20% ....
-- Shaped and profiled wires of cross-section :
7229 90 51 -- Half round kg 20% ....
7229 90 52 -- Flat and rectangular kg 20% ....
7229 90 53 -- 'L' shape kg 20% ....
7229 90 54 -- 'Z' shape kg 20% ....
7229 90 59 -- Other kg 20% ....
7229 90 60 -- Electric resistance wire (including electric resistance heating wire) kg 20% ....
7229 90 70 -- Crimped wire kg 20% ....
7229 90 90 -- Other kg 20% ....

1. Changes w.e.f. from 1-Jan-2007, as per Fourth Schedule of Finance Bill 2006