Heading

Sub- heading

Description of goods

Rate of duty

Standard

Preferential Areas

(1)

(2)

(3)

(4)

(5)

I-PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM

72.01

Pig iron and spiegeleisen in pigs, blocks or other primary forms.

7201.10

- Non-alloy pig iron containing by weight 0.5% or less of phosphorus

25%

7201.20

- Non-alloy pig iron containing by weight more than 0.5% of phosphorus

25%

7201.50

- Alloy pig iron Spiegeleisen

25%

72.02

Ferro-alloys

- Ferro-manganese:

7202.11

-- Containing by weight more than 2% of carbon

25%

7202.19

-- Other

25%

- Ferro-silicon:

7202.21

-- Containing by weight more than 55% of silicon

25%

7202.29

-- Other

25%

7202.30

- Ferro-silico-manganese

25%

- Ferro-chromium:

7202.41

-- Containing by weight more than 4% of carbon

25%

7202.49

-- Other

25%

7202.50

- Ferro-silico-chromium

25%

7202.60

- Ferro-nickel

25%

7202.70

- Ferro-molybdenum

25%

7202.80

- Ferro-tungsten and ferro-silico-tungsten

25%

- Other:

7202.91

-- Ferro-titanium and ferro-silico-titanium

25%

7202.92

-- Ferro-vanadium

25%

7202.93

-- Ferro-niobium

25%

7202.99

-- Other

25%

72.03

Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94% in lumps, pellets or simi­lar forms.

7203.10

- Ferrous products obtained by direct reduc­tion of iron ore.

40%

7203.90

- Other

40%

72.04

Ferrous waste and scrap; remelting scrap ingots of iron or steel.

7204.10

- Waste and scrap of cast iron

40%

- Waste and scrap of alloy steel

7204.21

-- Of stainless steel

40%

7204.29

-- Other

40%

7204.30

-- Waste and scrap of tinned iron or steel

40%

- Other waste and scrap:

7204.41

-- Turnings, shavings, chips, milling waste, sawdust, fillings, trimmings and stampings, whether or not in bundles.

40%

7204.49

-- Other

40%

7204.50

- Remelting scrap ingots

40%

72.05

Granules and powders, of pig iron, spiegeleisen, iron or steel.

7205.10

- Granules

40%

- Powders:

7205.21

-- Of alloy steel

40%

7205.29

-- Other

40%

II.- IRON AND NON-ALLOY STEEL

72.06

iron and non-alloy steel in ingots or other primary forms (excluding iron of heading No.72.03).

7206.10

- Ingots

40%

7206.90

- Other

40%

72.07

Semi-finished products of iron or non-

alloy steel.

- Containing by weight less than 0.25% of carbon:

7207.11

-- Of rectangular (including square) cross-section, the width measuring less than twice the thickness.

40%

7207.12

-- Other, of rectangular (other than square) cross-section

40%

7207.19

-- Other

40%

7207.20

- Containing by weight 0.25% or more of carbon.

40%

72.08

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.

7208.10

- In coils, not further worked than hot-rolled, with patterns in relief

40%

- Other, in coils, not further worked than hot-rolled, pickled:

7208.25

-- Of a thickness of 4.75mm. or more

40%

7208.26

--Of a thickness of 3 mm or more but less than 4.75 mm.

40%

7208.27

-- Of a thickness of less than 3 mm

40%

- Other, in coils not further worked than hot-rolled:

7208.36

-- Of a thickness exceeding 10 mm

40%

7208.37

-- Of a thickness of 4.75 mm or more but not exceeding 10 mm

40%

7208.38

-- Of a thickness of 3 mm or more but less than 4.75 mm.

40%

7208.39

-- Of a thickness of less than 3 mm.

40%

7208.40

- Not in coils, not further worked than hot-rolled, with patterns in relief

40%

- Other, not in coils, not further worked than hot-rolled:

7208.51

-- Of a thickness exceeding 10 mm

40%

7208.52

-- Of a thickness of 4.75 mm or more but not exceeding 10 mm

40%

7208.53

-- Of a thickness of 3 mm or more but less than 4.75 mm

40%

7208.54

-- Of a thickness of less than 3 mm

40%

7208.90

-- Other

40%

72.09

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated.

- In coils, not further worked than cold-rolled (cold-reduced):

7209.15

-- Of a thickness of 3 mm or more

40%

7209.16

-- Of a thickness exceeding 1 mm but less than 3 mm

40%

7209.17

-- Of a thickness of 0.5 mm or more but not exceeding 1 mm

40%

7209.18

-- Of a thickness of less than 0.5 mm

40%

- Not in coils, not further worked than cold-rolled (cold-reduced):

7209.25

-- Of a thickness of 3 mm or more

40%

7209.26

-- Of a thickness exceeding 1 mm but less than 3 mm

40%

7209.27

-- Of a thickness of 0.5 mm or more but not exceeding 1 mm

40%

7209.28

-- Of a thickness of less than 0.5 mm

40%

7209.90

- Other

40%

72.10

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.

- Plated or coated with tin:

7210.11

-- Of a thickness of 0.5 mm or more

40%

7210.12

-- Of a thickness of less than 0.5 mm

40%

7210.20

- Plated or coated with lead, including time-plate

40%

7210.30

-- Electrolytically plated or coated with zinc:

40%

- Otherwise plated or coated with zinc:

7210.41

-- Corrugated

40%

7210.49

-- Other

40%

7210.50

- Plated or coated with chromium oxides or with chromium and chromium oxides

40%

- Plated or coated with aluminium:

7210.61

-- Plated or coated with aluminium-zinc al­loys

40%

7210.69

-- Other

40%

7210.70

- Painted, varnished or coated with plastics

40%

7210.90

- Other

40%

72.11

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated

- Not further worked than hot-rolled:

7211.13

-- Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief

40%

7211.14

-- Other, of a thickness of 4.75 mm or more

40%

7211.19

-- Other

40%

- Not further worked than cold-rolled (cold-reduced):

7211.23

-- Containing by weight less than 0.25% of carbon

40%

7211.29

-- Other

40%

7211.90

- Other

40%

72.12

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.

7212.10

- Plated or coated with tin

40%

7212.20

- Electrolytically plated or coated with zinc:

40%

7212.30

- Otherwise plated or coated with zinc

40%

7212.40

- Painted, varnished or coated with plastic

40%

7212.50

- Otherwise plated or coated

40%

7212.60

- Clad

40%

72.13

Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.

7213.10

- Containing indentations, ribs, grooves or other deformations produced during the rolling process

40%

7213.20

- Other of free-cutting steel

40%

- Other:

7213.91

-- Of circular cross-section measuring less than 14 mm in diameter

40%

7213.99

-- Other

40%

72.14

Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot drawn or hot-extruded, but in­cluding those twisted after rolling.

7214.10

- Forged

40%

7214.20

- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

40%

7214.30

- Other of free-cutting steel

40%

- Other:

7214.91

-- Of rectangluare (other than square ) Cross-section

40%

7214.99

-- Other

40%

72.15

Other bars and rods or iron or non-alloy steel.

7215.10

- Of free-cutting steel, not further worked than cold-formed or cold-finished

40%

7215.50

- Other, not further worked than cold-formed or cold-finished

40%

7215.90

- Other

40%

72.16

Angles, shapes and sections of iron or non-alloy steel.

7216.10

- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm

40%

- L or T sections, not further worked than hot-rolled, hot drawn or extruded, of a height of less than 80 mm:

7216.21

-- L sections

40%

7216.22

-- T sections

40%

- U, I or H sections, not further worked than hot-rolled, hot drawn or extruded of a height of 80 mm or more:

7216.31

-- U sections

40%

7216.32

-- I sections

40%

7216.33

-- H sections

40%

7216.40

- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more

40%

7216.50

- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded.

40%

- Angles, shapes and sections, not further worked than cold-formed or cold-finished

7216.61

-- Obtained from flat-rolled products

40%

7216.69

--Other

40%

- Other:

7216.91

-- Cold-formed or colf-finished from flat-rolled products

40%

7216.99

- Other

40%

72.17

Wire of iron or non-alloy steel.

7217.10

- Not plated or coated, whether or not pol­ished

40%

7217.20

- Plated or coated with zinc

40%

7217.30

- Plated or coated with other base metals

40%

7217.90

- Other

40%

III-STAINLESS STEEL

72.18

Stainless steel in ingots or other primary forms; semi-finished products of stain­less steel.

7218.10

- Ingots and other primary forms

40%

- Other:

7218.91

-- Of rectangular (other than square) cross-section

40%

7218.99

--Other

40%

72.19

Flat-rolled products of stainless steel, of a width of 600 mm or more.

- Not further worked than hot-rolled, in coils:

7219.11

-- Of a thickness exceeding 10 mm

40%

7219.12

-- Of a thickness of 4.75 mm or more but not exceeding 10 mm

40%

7219.13

-- Of a thickness of 3 mm or more but less than 4.75 mm

40%

7219.14

-- Of a thickness of less than 3 mm

40%

- Not further worked than hot-rolled, not in coils:

7219.21

-- Of a thickness exceeding 10 mm

40%

7219.22

-- Of a thickness of 4.75 mm or more but not exceeding 10 mm.

40%

7219.23

-- Of a thickness of 3 mm or more but less than 4.75 mm

40%

7219.24

-- Of a thickness of less than 3 mm

40%

- Not further worked than cold-rolled (cold-reduced):

7219.31

-- Of a thickness of 4.75 mm or more

40%

7219.32

-- Of a thickness of 3 mm or more but less than 4.75 mm

40%

7219.33

- Of a thickness exceeding 1 mm but less than 3 mm

40%

7219.34

-- Of a thickness of 0.5 mm or more but not exceeding 1 mm

40%

7219.35

-- Of a thickness of less than 0.5 mm

40%

7219.90

- Other

40%

72.20

Flat-rolled products of stainless steel, of a width of less than 600 mm.

- Not further worked than hot-rolled:

7220.11

-- Of a thickness of 4.75 mm or more

40%

7220.12

-- Of a thickness of less than 4.75 mm

40%

7220.20

- Not further worked than cold-rolled (cold-reduced)

40%

7220.90

- Other

40%

72.21

7221.00

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.

40%

72.22

Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.

- Bars and rods, not further worked than hot-rolled, hot drawn or extruded.

7222.11

-- Of circular cross-section

40%

7222.19

-- Other

40%

7222.20

-- Bars and rods, not further worked than cold-formed or cold-finished

40%

7222.30

-- Other bars and rods

40%

7222.40

-- Angles, shapes and sections

40%

72.23

7223.00

Wire of stainless steel.

40%

IV.-OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL

72.24

Other alloy steel in ingots or other pri­mary forms; semi-finished products of other alloy steel.

7224.10

- Ingots and other primary forms

40%

7224.90

- Other

40%

72.25

Flat-rolled products of other alloy steel, of a width of 600 mm or more.

- Of silicon-electrical steel:

7225.11

-- Other-oriented

40%

7225.19

-- Other

40%

7225.20

- Of high speed steel

40%

7225.30

- Other, not further worked than hot-rolled in coil

40%

7225.40

- Other, not further worked than hot-rolled not in coils

40%

7225.50

- Other, not further worked than cold-rolled (cond-recduced)

40%

- Other:

7225.91

-- Electricolytically plated or coated with zinc

40%

7225.92

-- Otherwise plated or coated with zinc

40%

7225.99

-- Other

40%

72.26

Flat-rolled products of other alloy steel, of a width of less than 600 mm.

- Of silicon-electrical steel:

7226.11

-- Grain-oriented

40%

7226.19

-- Other

40%

7226.20

- Of high speed steel

40%

- Other:

7226.91

-- Not further worked than hot-rolled

40%

7226.92

- Not further worked than cold rolled(cold reduced)

40%

7226.93

-- Electrolytically plated or coated with zinc

40%

7226.94

-- Otherwise plated or coated with zinc

40%

7226.99

-- Other

40%

72.27

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.

7227.10

- Of high speed steel

40%

7227.20

- Of silico-manganese steel

40%

7227.90

- Other

40%

72.28

Other bars and rods of other alloy steel; angles, shapes and sections, of other al­loy steel; hollow drill bars and rods, of alloy or non-alloy steel.

7228.10

- Bars and rods, of high speed steel

40%

7228.20

- Bars and rods, of silico-manganese steel

40%

7228.30

- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded

40%

7228.40

- Other bars and rods, not further worked than forged

40%

7228.50

- Other bars and rods, not further worked than cold-formed or cold-finished

40%

7228.60

- Other bars and rods

40%

7228.70

- Angles, shapes and sections

40%

7228.80

- Hollow drill bars and rods

40%

72.29

Wire of other alloy steel.

7229.10

- Of high speed steel

40%

7229.20

- Of silico-manganese steel

40%

7229.90

- Other

40%