CUS NTF NO. 25/1999 DATE 28/02/1999

Concessional rate of duty on goods imported for the manufacture of excisable goods

In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods specified in column (3) of Table below, and falling under the Chapters of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) specified in the corresponding entry in column (2) of the said Table, when imported into India for use in the manufacture of the finished goods specified in the corresponding entry in column (4) of the said Table, from so much of that portion of the duty of customs leviable thereon which is specified in the said First Schedule, as is in excess of the amount calculated at the rate of,-

(a) 5% ad valorem in the case of the imported goods specified in List A;
(b) 15% ad valorem in the case of the imported goods specified in List B; and
(c) 25% ad valorem in the case of the imported goods specified in List C:

Provided that the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996.

Table


S.No. Chapter Description of imported goods Description of finished goods
(1) (2) (3) (4)
LIST A
1. 15,29,32, 34,39,48, 70 Alpha cellulose paper/cotton paper; Electrical grade kraft paper; Tung oil; Volan/Silane treated glass fabric/cloth Copper clad laminates phenolic or paper phenolic or glass ep-oxy types; composite type copper clad laminates; printed circuit boards.
2. 25,28,40, 56,70,84, 85 Potassium Carbonate/Potassium Nitrate (prilled); Barium carbonate; Pumice powder; Cerium oxide; Anode buttons; Necks and Neck tubings; woolfelt/ rubber based felt sleeve; cullet (recycled glass scrap); Wool felt; Spodumene Glass shell/parts of television picture tube.
3. 25,28,40, 70, 84, 85 Strontium carbonate; garnet powder; stud pins; Titanium dioxide; sodium antimonate; rubber sleeve Class shells/parts for colour picture tubes. Glass shell/ parts of cathode ray tubes
4.   Omitted  
5. 28 High purity gases : Argon; halocarbon-14; halocarbon-116; halocar-bon-23; helium; silicon tetra-chloride; sulphur hexafluoride; chlorine; silane; hydrochloric acid; phosphine & silane mixture; boron trichloride; dichlorosilane; diborane; hydrogen bromide; phosphine in nitrogen; nitrous oxide; boron trifluoride; arsine & arsine mixture; phosphine in hydrogen; hydrogen; nitrogen Integrated circuits, Semi- conductor devices.
6. 28,29 High purity chemicals: Acetic acid MOS/CMOS grade; Sulphuric acid MOS/ CMOS grade; Hydrochloric acid MOS/CMOS grade; Buffered oxide etchant MOS/ CMOS grade; Ammonium fluoride MOS/CMOS • grade; Trichloro-ethylene MOS/ CMOS grade; Isopropyi alcohol MOS/CMOS grade; Acetone MOS/CMOS grade; Hydrofluoric acid MOS/ CMOS grade; Nitric acid MOS/CMOS grade; Phos-phoric acid MOS/CMOS grade; Hydrogen peroxide MOS/ CMOS grade Integrated circuits, Semi-conductor devices.
7. 28,29,38, 76 Cadmium sulphide; cadmium telluride; silicon dioxide; cadmium chloride; zinc telluride; indium; germane; disilane; phosphine; hydrogen fluoride; aluminium sputtering target; zinc oxide sputtering target, adhesive coated aluminium foil; high purity hydrogen high purity nitrogen; high purity argon; copper doped graphite paste; high purity methane; diborane in high purity helium Solar cells/modules.
8. 28,29,32 38,39,68 74 ., Copper plating salts, their i, brighteners, levellers, condi tioners, replenishers, stabi lizers; Black Oxide Coating (Microtech) solution/ salts, predip solution/salts, palladium catalyst solution/ salts Printed Circuit Boards.
9. 28,29,32 38,71 Resistive, Conductive, Di-electric, Overglaze or solder pastes, compositions or inks in packing not exceeding 20 kg. Hybrid Microcircuits; Potentiometers; Resistors (other than heating resistors); Ceramic and Mica Capacitors; Conductive Rubber Switches/Key Boards.
10. 28,29,32,39,48,69,74,85 Ceramic bodies (coated or uncoated); bandoliering tape with or without adhesives; solder plated copper wire of dia. upto 1 mm; solder plated brass wire of dia. upto 1 mm; high melting point solder alloy; paper backed polyurethane tape; epoxy marking ink with or without hardner/thinner Thermistors. Ceramic capacitors; Resistors (other than heating resistors)
11. 28,29,34 Resist stripper Semi-conductor devices, printed circuit boards.
12. 28,29,34,85 Special materials: Surfactant, tetra ethyl-ortho-silicate (TEOS); trimethyl borate (TMB); trimethyl phosphite (TMPI); trichloroethane (TCA); dichloroethylene; sputtering targets; photo resist primer; edge bead remover Integrated circuits, Semi-conductor devices.
13. 28,29,37 Photo resist & associated thinners or/and developers; photospin glass Semi-conductor devices, printed circuit boards. LED/LED Displays, Liquid Crystal Displays, Hybrid Micro-Circuits
14. 28,29,38 Electrolyte Etched or Formed Aluminium Foil, Electrolytic Capacitors.
15. 28, 29,38 Dopants or doping sources in all forms, and with or without precious metal constituents Semi-conductor devices.
16. 28,29,38,39 Epoxy/Epoxide resins/ Epoxy moulding powder, compounds or encapsulants; Fillers, thinners, hardeners, accelerators and fire retardants Capacitors; Semi-conductor Devices; Light Emitting Diodes; mounted piezo electric crystal; Liquid Crystal Displays; Electronic Valves and Tubes; Switches; Copper clad laminates of glass epoxy/paper expoxy type; composite type copper clad laminates; Delay lines; Line and Wave Traps; Potentiometers; Silicon Crystals or Silicon wafers; Connectors; Resistors (other than heating resistors); Deflection parts; Loudspeakers; Magnetic Heads; Paper Cones/ Spiders/Dust Caps for Loudspeaker; Hybrid Microcircuits; Printed parts. Relays

17. 28, 32 Ferric Oxide of purity of 99% and above; manganous manganic oxide with manganese content 71% or above; Manganese di-oxide of purity of 99% and above, Manganous Oxide; Nickel Oxide; Strontium Carbonate

Ferrites. Ceramic capacitors, Resistors (other than heating resistors)
18. 28,38,39,70, 74,76 Aluminium paste; ethylene vinyl acetate sheets (EVA); primer for EVA; Crane glass; tedlar coated aluminium sheet; phosphorous oxychloride; halo carbon (CF4)/Freon gas; tinned copper interconnect; toughened glass with low iron content and transmittivity of min. 90% and above; multilayered sheets with tedlar base; fluro polymer resin; ultra high purity (UHP) silane in UHP nitrogen; UHP silane; diborane in UHP silane; MOCVD grade phosphine in UHP silane; silver sputtering target; high purity tin tetrachloride; nitrogen trifluoride of 99% purity and above Solar cells/modules.
19. 28,39, 68,73 Blue steel lapping carriers/lapping carriers; lapping vehicles; lapping abrasive powder; lapping compound Mounted piezoelectric crystals; Printed Circuit Boards; Semi-conductor devices; Potentiometers; Resistors (other than heating resistors); Connectors; Switches; Relays; Tape deck mechanism; Magnetic heads; Deflection parts; DC micromotor upto 13.5 V not exceeding 20 Watt rating; Silicon in all forms, LED lamps and displays.
20. 28,29, 81,85 Tantalum powder; Tantalum wire; CM Seals; Cans; Silver powder suspension; Manganese Nitrate; Heat shrinkable polyester tubing Tantalum capacitors. Mounted Piezo Electric Crystals
21. 28,48,69,75,78,81,84 Lead based ceramic composition; Magnesium titanate based ceramic composition; Neodium based ceramic composition; Alumina setters/slabs; Lint free paper/paper towels/filter paper; Zirconia milling media/high alumina tumbling media; Steel shots - copper plated hollow; Nickel and sulphonic acid based plating chemicals; Razer blades/doctor blades Ceramic dielectric (multilayer) capacitors. Ceramic capacitors, Resistors (other than heating resistors)
22. 28, 68 Tantalum Neodyme oxide; Neodyme oxide; Strontium carbonate Ceramic Capacitors.
23. 28,70,73,75, 85 Crystal Holders; Bases; covers; Glass Bulbs; Glass Bases; Nickel Eyelets; Springs; Solder wire 25 SWG or thinner; Chromium Pellets Mounted Piezoelectric crystals.
24. 28, 81 Tungsten rhenium wire; Suspension of aluminium oxide in binder; Suspension of tungsten powder and aluminium oxide in binder; Triple carbonate suspension of calcium, barium, strontium in binder Electron guns and electron gun parts.
25. 29 Tetra Bromo Bisphenol-A; Tricresyl/Aryl Phosphate Copper clad laminates for Printed Circuit Boards.
26. 32 Electron Phosphor Electronic Valves and Tubes
27. 32 Desmearing agents Printed Circuit Boards.
28 32,35,39 Silicone based resins, oils, varnishes, lacquers, elastomers, with or without additives Semi-conductor Devices; Liquid Crystal Displays; Electronic Valves and Tubes; Resistors (other than heating resistors); Connectors; Magnetic Tape; Relays; Potentiometers; Switches; Capacitor grade metallised plastic film; Piezoelectric crystal; Hybrid Micro circuits. Capacitors
29. 32,37, 39 Solder Mask/Resist in ink or film form, with or without associated catalysts Printed Circuit Boards.
30. 32,38 Screen printing inks, dyes, emulsions, lacquers, films (including sensitisers, hardners, catalysts) Semi-conductor devices, printed circuit boards, potentiometers, capacitors, hybrid microcircuits, printed parts, coils and inductors, resistors (other than heating resistors).
31. 32, 38 internal dag, Electronic Valves and Tubes.
32. 35, 39 Polyamide coatings or adhesives Semi-conductor devices; Heat sinks; deflectioii parts.
33 37 Photo Polymer Film Printed Circuit Boards; Liquid Crystal Displays.
34 37, 39 High resolution, high contrast photographic films and photo stencil films; DIAZO (C6H5N2) films Printed Circuit Boards; semi-conductor devices; hybrid microcircuits.
35. 37, 70 High Resolution Photo Plates; Photomask Substrates High Resolution Photo Masks; Semi-conductor devices; Liquid Crystal Displays; Silicon Single Crystals or Wafers. Printed Circuit Boards
36. 37, 70 High resolution photo mask Semi-conductor devices; Printed Circuit Boards; Liquid Crystal Displays.
37. 38 Silicon in the form of undiffused wafers, discs or chips Semi-conductor devices.
38. 38,39,76 Polyvinyl flouride (TEDLAR); Tedlar Aluminium Tedlar Solar cells/modules.
39. 38, 81 Lithium niobate wafers Hybrid microcircuits.
40. 38, 85 Silicon in the form of diffused wafers, discs or chips (with or without molybdenum disc) Hybrid microcircuits or semi-conductor devices.
41. 38, 85 Getters Electronic valves and tubes.
42. 39 Glass epoxy or/and polyamide prepregs Multilayer Printed Circuit Boards; copper clad laminates.
43. 39 Silicone rubber Keypad switches; parts of EHT transformers.
44. 39 Plastic Film Capacitors or Mixed Dielectric Capacitors, other than Power Capacitors.

Explanation.- for the removal of doubts, “plain plastic film” includes bi-axially oriented polypropylene (BOPP) film

Plastic Film Capacitors; Mixed Dielectric Capacitors.
45. 39 Nylon 6.30% glass filled, flame retardant moulding powder/granules and with or without other additives Potentiometers; connectors. Parts of relays/switches/connectors
46. 39 Plain and glass filled nylon/polyamide with or without other additives Relays; Potentiometers; tape deck mechanism; connectors. Parts of connectors; parts of relays/switches/connectors
47. 39 Polypropylene moulding powder / granules Deflection parts; Cassettes. Capacitors
48. 39 Polybutylene terephthalate Connectors; deflection parts; switches; relays. resistors; potentiometers; parts of relays/switches/connectors
49. 39 Heat shrinkable PVC sleeving, tubing, film or ring Capacitors; relays; deflection parts.
50. 39 Polyurethane lapping pads Mounted piezoelectric crystals; Printed Circuit Boards/semi-conductors devices; potentiometers; resistors (other than heating resistors); connectors; switches; relays; tape deck mechanisms; magnetic heads; deflection parts; DC Micromotors upto 13.5 volts and not exceeding 20 watts rating silicon (in all forms).
51. 39 Plain polystyrene film Plain film capacitors; mixed dielectric capacitors.
52. 39 Plain plastic film (other than Polystyrene film) of thickness 12 microns or below

'Explanation.- For the removal of doubt, "plan plastic film" includes Biaxially Oriented Polypropylene (BOPP) film;
Electronic capacitor grade metallised dielectric plastic film.
53. 39 Release film for multilayer laminates Printed Circuit Boards.
54. 39, 40 Polyvinyl Alcohol, Polyisobutylene, Chlorosulphona ted Polyethylene (HYPALON) Ferrites.
55. 39, 43 Antistatic materials in the form of tubes, strips, mats, covers, bins, boxes, containers Semi-conductor devices. Hybrid microcircuits.
56. 39,48,59, 85 Insulating/taping material (including pocket carrier tape) in tape, roll or strip form with or without adhesive Capacitors; deflection parts; resistors (other than heating resistors); semi-conductor devices; inductors.
57. 39,48,85 Domes or Dust caps; Paper/Plastic cones Loudspeakers.
58. 39,48,85 Parts of Potentiometers Potentiometers.
59. 39, 59, 73 Screen mesh of stainless steel/polyester/metallised polyester/metallised nylon (in sizes of mesh 60 or above) Ceramic capacitors. resistors; potentiometers; hybrid microcircuits
60. 39, 69,73,85 Ceramic/alumina substrates Potentiometers; printed parts. resistors (other than heating resistors)
61. 39, 73, 79,85 Parts of magnetic sound heads Magnetic sound heads.
62. 39, 74,76 Copper clad laminates laminated to nylon, teflon, polyester; Aluminium clad entry foil and back up laminates Printed Circuit Boards.
63. 39,85 Polyethylene terephthalate film with ferro magnetic coating of thickness upto 0.005 inch with magnetic coating 50 to 180 microinch Floppy diskettes.
63A. 39,73 Moulded shell with liner, Steel hub ring, spring, shutter Floppy diskette (3.5" size).
64. 39,85 Parts/articles of silicone, Elastomer or Silicone rubber Liquid Crystal Displays; Semi-conductor Devices; EHT Transformers; Potentiometers; Electrolytic Capacitors; Solid tantalum capacitors.
65. 39,85 Formers, bases, bobbins; Holders, brackets; Shielding cases,cans RF/IF coils or transformers or deflection parts.
66. 40,59 Bungs; Rubber pinch rollers with or without plastic bush Electrolytic capacitors; tape deck mechanisms.
67 40, 84,85 Parts of Rotor Assembly; Commutator assembly or parts thereof; Brush assembly or parts thereof DC Micromotors upto 13.5 volts and not exceeding 20 watts rating.
68. 40, 85 Anode assembly consisting of EHT cable, silicone rubber cap and contact spring or parts thereof (EHT cable in cut pieces or running length) Deflection parts.
69. 48 Electrolytic Capacitor/Condenser Tissue paper Electrolytic Capacitors; Plastic Film Capacitors.
70. 48,76 Kraft paper/tissue paper or aluminium foil for voice coil Loud-speakers (cone type).
71 59 Felt sheet (fully compressed) of 1.5 mm thickness and below Tape deck mechanism.
72. 69, 78,85 Headers; Caps with or without leads; Cans with or without leads; Pins; Stud seals; Lead beads; Ceramic beads; Ceramic-glass packages; Cap to Lead Assembles; Ceramic Pipes; Lead frames, single or in roll form; Housings; Brass ring Semi-conductor devices; Light Emitting Diodes; Resistors (other than heating resistors); Capacitors; Connectors; Hybrid Microcircuits; Printed parts.
73. 69, 85 Alumina rods and bars (with Alumina content above 90%) in coated or uncoated form; Ceramic plates/flats/cases/ bases/formers; Steatite rods and bars in coated or uncoated form Resistors (other than heating resistors); Semi-conductor Devices; Hybrid Microcircuits; Electron Guns and Electron Gun parts.
74. 69,85 Ceramic dielectric (coated or uncoated) Ceramic capacitors.
75. 70 Glass filament yam Silane treated glass cloth/fabric for use in the copper clad laminates.
76. 32,70,85 Glass frit or glass powder; Glass preforms or pellets; Glass tubes Liquid Crystal Displays; semi-conductor devices; Electronic valves and tubes (other than television picture tubes/cathode ray tubes); Glass to metal seals; Lead frames; Transistor headers; Reed relays or Reed switches; delay lines; resistors (other than heating resistors); mounted piezoelectric crystals; electron guns and electron gun parts; gas discharge tubes.
77. 70, 85 Fused Quartzware Semi-conductor devices; silicon in all forms.
78. 71 Synthetic quartz crystal blocks and blanks Mounted Piezoelectric crystals.
79. 71 Contact tape with pure Nickel base and Crown Gold alloy; Contact tape with solder Diamond Back in fine silver; Contact tape in silver or silver alloy with or without palladium with Gold overlay Relays; Switches.
80. 71 Gold in the form of wire, ribbon, preform of purity 99.99 % and above Semi-conductor devices; Light Editing Diodes.
81. 71, 72, 75,80 Nickel plated steel strip; tin silver antimony alloy Semi-conductor devices.
82. 71, 76, 85 Aluminium wire with silicon or magnesium impurity of upto 2%; gold wire with phosphorous or antimony doping Semi-conductor devices.
83. 72 CRNGO silicon steel strip /sheet/coil/hoop with or without tin plating DC Micromotor; Potentiometer; Resistors.
84. 72 Coated/uncoated electro-galvanised CRCA/ mild steel/ stainless steel in the form of sheet / strip /wire/coils DC Micromotor; tape deck mechanism. resistors, potentiometers
85. 72,73 Iron of 99.7% purity and above Cast Alloy Permanent Magnets. Relays
86. 72, 73, 75,81 Nickel Iron Cobalt Alloy in all forms Semi-conductor devices; electronic valves and tubes; transistor headers; glass to metal seals/lead frames; cast alloy permanent magnets; hybrid microcircuits; gas discharge tubes.
87. 72 or 73 Copper clad tin coated steel wire, dia 0.4 mm to 1.2 mm/ solder plated Copper cover steel wire (SPC). Lead tabs for electrolytic capacitors. Capacitors
88. 73,85 Metal clad substrates in any form with or without tags Potentiometers; Hybrid microcircuits; Printed parts; semi-conductor devices; Light Emitting Diodes.
89. 74 Electrolytic Tough Pitch (ETP) Copper wire rods Lead wire for electronic parts.
90 74 Solder plated/unplated brass-strips upto 100 mm width; silver plated brass strips upto 100 mm width Potentiometers; connectors; switches; relays.
91. 74 Phosphor Bronze Sheets/ bars/ section/ flats/ strips/wire/rods/foils/ pipes, with or without plating Relays; Tape Deck Mechanism; Connectors; Potentio-meters; Heat Sinks; cassettes; parts of cassettes; T.V. tuner; telescopic antenna; Gas discharge tubes.
92. 74 Beryllium Copper rods/strips/sheets/wire/ foils, with or without plating ; Rectangular Profile Brass material(CuZn39Pb2) Connectors; Relays; Switches; gas discharge tubes.
93. 74 Tin coated/solder plated copper wire Resistors. Capacitors, Deflection Components, Thermistors, Varistors
94. 74  Continuous cast copper wire rod/copper scrap, electrolytic grade of purity 99.9% or above Copper foil for copper clad laminates.
95. 74,76, 85 Copper-cadmium braided wire/Self-soldering/self-bonding aluminium wire Loudspeakers; microphones.
96. 74,85 Oxygen-free high conductivity (OFHC) Copper base with weldable steel ring Semi-conductor devices.
97. 74,85 OFHC copper wires, bars, rods, angles, shapes and sections, plates, sheets, strips, tubes and pipes Semi-conductor devices; electronic valves and tubes; transistor headers; glass to metal seals; capacitors.
98. 74,85 Rayon or Silk cover Litz wire of the following sizes -(a) 6, 8, 12 and 24 strands with each strand diameter 0.03 mm; (b) 6 or 9 strands with each strand diameter 0.04 mm RF/IF Coils or transformers.
99. 74,85 Parts made of OFHC copper Semi-conductor devices, electronic valves & tubes, transistor headers, glass to metal seals, capacitors.
100. 76 Etched or formed Aluminium Foils Electrolytic Capacitors.
101. 76 Plain Aluminium foil containing more than 99% Aluminium Etched or formed Aluminium foil; electrolytic capacitors or plastic film capacitors.
102. 76 Aluminium of purity 99% or above in the form of wire, strips, sheets, rods, bars, pipes, plates, sections, ribbons or shapes Cans or Leads for Electrolytic Capacitors; Semi-conductor Devices; Light Emitting diodes; Capacitors; Capacitor grade Metallised Plastic films; Potentiometers; Disc covers for electrolytic capacitors.
103. 81 Cobalt Cast Alloy Permanent Magne ts.
104. 81 High purity chromium powder (99.99% and above) Semi-conductor devices, Mounted piezo electric crystals, electronic valves and tubes, vacuum interrupter tubes. Resistors
105. 81,85 Molybdenum and molybdenum alloys, wrought, in all forms and articles and parts thereof Electronic Valves and Tubes; X-ray tubes; Semi-conductor Devices; Mounted Piezoelectric Crystals.
106. 84,85 Parts of Vacuum Interrupter Tubes Vacuum Interrupter Tubes.
107. 85 Self bonding/Self soldering insulated or enamelled copper wire Deflection parts; Loudspeakers; Relays; Magnetic Heads; RF/IF Coils; Transformers (other than Power transformers); DC Micromotors upto 13.5 volts and not exceeding 20 watts rating; electronic tuner. Reed Relays, Hybrid Micro-circuits, Degaussing Coil
108. 85 Parts of gas discharge tubes Gas discharge tubes.
109. 85 Light Emitting Diodes in the form of Chips, wafers or undiced discs Light Emitting. Diodes; Lamps and Displays.
110. 85 Parts of Cathode Ray Tubes (other, than Glass parts) Cathode Ray Tubes.
111. 85 Lead Tabs/Paddle Tabs Electrolytic Capacitors.
112.  85 Parts of Relays, Switches, Connectors Relays; Switches; Connectors.
113. 85 Parts of electron Guns Electron Guns, Television picture tubes or Cathode Ray Tubes.
114. 85 Casings of aluminium Electrolytic capacitors.
115. 85 Parts of CD-Deck Mechanism CD Deck Mechanism.
116. 85 Parts of Fly-back Transformer Flyback Transformers.
117. 85 Parts of Tuners TV Tuners.
118. 85 Parts of Data Cartridge Data Cartridge.
119. 85 Parts of transmitting tubes Transmitting tubes.
120. 85 Parts of deflection yoke (DY), excluding colour deflection yoke core Deflection parts.
 121. 75,85, 90 Nickel and nickel alloys, wrought in all forms and articles thereof Semi-conductor Devices; Liquid Crystal Displays; Electronic valves and tubes; Pick-up cartridges; Stylii; X-Ray Tubes; Cast Alloy Permanent magnets; Transistor Headers; Glass to metal seals; Lead frames; Resistors (other than heating resistors); Magnetic Heads; Potentiometers; Electron guns and electron gun parts; Electro-magnetic shields; Encoders and synchros.
122 39,74,75,76 Composite copper clad materials consisting of Paper + Epoxy + Glass cloth Printed Circuit Boards
123 74 Glass Epoxy Copper clad laminates or Paper Phenolic Copper clad laminates Printed Circuit Boards
124 74 Copper foils(plain or adhesive coated) Copper clad laminates (phenolic or glass epoxy types);composite type copper clad laminates; multi-layer Printed Circuit Boards Parts of connectors
125 28,29,38,72, 74,84 Cupric Chloride Etchant; Ammonical Etchants; Solid Carbide Drills; Routers; Hot Air Levelling Flux; Electroless Copper Plating Solution; Sensitisers; Activators; Post Activators; Copper foil of refined copper; Colloidal / Semi colloidal Graphite (Shadow) Printed Circuit Boards
126 28,29,39,68,71,81,82 Plastic Film for Wafer Dicing; Graphite Jigs /Block/ Rods /Plates; Dicing blades/ wheels; Tungsten filament and or parts thereof;
Tungsten Wire / Rod; Colour Paste and Diffusants; Silver conductive paste / Suspension; Palladium Wire; n- Butyl Acetate; Bonding Tools

LED/LED Displays; Semiconductor Devices; Hybrid Microcircuits; Mounted Piezo Electric Crystals; Resistors; Potentiometers
127 70,85 Parts of data graphic display tubes(colour), with a phosphor dot screen pitch smaller than 0.4mm Data graphic display tubes(colour), with a phosphor dot screen pitch smaller than 0.4mm
128 70,75 Glass Tubes/ Insulators/ Spacers;

Mounted piezo electric crystals
129 39 Diallylphthalate (DAP) Moulding Powder or Compound; Plain or Glass/ Fibre filled with or without additives Connectors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Potentiometers; Relays of contact rating upto 7 amperes; Resistors
130 39 Polyvinyl Chloride Film/Sheet Floppy Disks/Diskettes
131 28,38,39 Gold plating make up and replenisher solutions and salts; Resins for gold recovery Semiconductor devices; LED/LED Displays; Connectors; PCBs Parts of connectors
132 74  Solder Plated Annealed Copper Wire (SCA) of diameter 0.4mm to 1mm Plastic film capacitors
133 79,80 Zinc of purity 99% or above in Rod, Wire or Strip form; Zinc Wire / Zinc- Aluminum wire with dia up to 5mm ; Tin - zinc wire with dia upto 3mm Electronic Capacitor Grade Metallised Plastic Film / Capacitors
134 80 Tin Foil/ Tin Alloy Foil Plastic Film Capacitors; Resistors (other than heating resistors)
135 76 Aluminium wire (of purity 99.9% or above ) of dia upto 3mm Lead Wires/Lead Tabs for electrolytic capacitors; Electronic Capacitor grade Metallized Plastic film; Plastic film capacitors; semiconductor devices Capacitors
136 28 Barium Carbonate Ceramic Capacitors
137 38,39,69 Hydroxy Propyl Methyl Cellulose Barium Titanate based or Lead Titanatebased Ceramic composition/ Powder Ceramic Capacitors, Ceramic Substrates /Rods/ Discs / Dielectric
138 28 Magnesium Oxide (Purity not less than 98%); Zinc Oxide (Purity not less than 98%); Aluminium Oxide (Purity not less than 99.9%); Vanadium Pentoxide (Purity not less than 99.9%); Lithium Carbonate (Purity not less than 99%); Manganese Carbonate (Purity not less than 98%); Bismuth Oxide (Purity not less than 99%); Cobalt Oxide (Purity not less than 99%); Copper Carbonate (Purity not less than 98%); Chromium Oxide (Purity not less than 98%); Indium Oxide (Purity not less than 99%); Dysprosium oxide (Purity not less than 99%); Gadolinium Oxide (Purity not less than 99%);Yttrium Oxide (Purity not less than 99.9%); Calcium Carbonate (Purity not less than 98%) ; Tin Oxide (Purity not less than 98%); Magnesium Carbonate Purity not less than 99%); Iron Oxide (Purity not less than 99%); Barium Carbonate (Purity not less than 99%)

Resistors; Ceramic Capacitors
139 39,48,59 Resin -VAGH Co-Polymerised Vinyl Chloride Vinyl Acetate, Pressure Sensitive felt, with or without adhesive,Silicon Coated/ Carbonized silicon paper Magnetic Tapes/Cassettes Parts of cassettes
140 39 Polyimide Film (Kapton) IC Sockets (Connectors); Resistors; Potentiometers; Semiconductor devices
141 39 Modified Polyphenylene Oxide Deflection Components ; potentiometers
142 39 Phenolic Moulding Powder/ Resin Resistors; Potentiometers; Capacitors; Hybrid Micro-circuits
143 72,74 Lead wires of Iron or non alloy steel plated or coated with other base metals Resistors ; Potentiometers; Plastic Film Capacitors; Lead Tabs of Electrolytic Capacitors

144 29,72,74,76, 85 Copper alloy resistance wire and strips; Steel or Aluminium in substrate or sheet form; Butyl DiGol Resistors; Potentiometers
145 69,75,76,81 Metal alloy targets Resistors; Resistor Grade Metallized Ceramic Cores
146 85 Chip Transistors; Varicap Diodes Tuners; Modulators; Hybrid Micro Circuits
147 74 Cladded Copper/ Copper Alloy Strip / Foil Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Connectors DC Micro-motors; parts of connectors
148 28 Zinc Oxide (Purity minimum 99.5%);Strontium Oxide/ Strontium Carbonate; Zinc Stearate (Purity minimum 99%); Polyvinyl alcohol (PVA); Polyvinyl Butyral (Ash Content max 1%) Pre-Calcined Ferrite Powder (Spray Dried); Resistors
149 28 Zirconium Oxide (Purity not less than 99%); Tin Oxide (Purity not less than 99%); Lanthanam Oxide (Purity not less than 99%); Zinc Oxide (Purity not less than 98%); Polystyrene (Purity not less than 98%); Magnesium Oxide (Purity not less than 98%); Calcium Carbonate (Purity not less than 98%); Tantalum Oxide (Purity not less than 99%); Barium Carb onate (Purity not less than 99%) Microwave Dielectrics; Ceramic Capacitors; Resistors ; Varistors; Thermistors
150 39 Phenolic Moulding Powder /Resin Hybrid Micro circuits; Potentiometers; Ceramic Capacitors; Thermistors; Varistors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Connectors Capacitors
151 39,69 Guide Ceramic; Guide LCP (Liquid Crystal Polymer) Print heads
152 85 Parts of Loudspeaker Loudspeakers
153 74,85 High Voltage Rectifier Diodes; Focus Potmeter; Electrolytic Tough Pitch Wire/Rods/Formed Pins/parts made thereof Deflection Components
154 39 Polycarbonate (Plain or glass filled moulding powder) Resistors; Potentiometers; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC Capacitors
155 39 Poly Vinyl Acetate Resistors; Potentiometers; Hybrid Micro Circuits
156 72 Nickel Iron (low carbon / gas free grade) in Sheet or strip form / EB Welded Triple Metal Strips./ Controlled Expansion Alloy Strips Resistors; Potentiometers ;
157 39 SRBP (Synthetic resin bonded paper) sheets and substrate

Potentiometers; Switches with contact rating les than 5 amperes at voltage not exceeding 250 Volts AC or DC
158 25 Ball Clay Ceramic Cores /Substrates for resistors
159 32 Borosilicate Glass Powder Parts of Electron Gun /Multiform Bead Glass Rods
160 74 Unplated Brass Strips in Coil form 70 mm width; Phosphor Bronze Strips in Coil Form Connectors
161 72,74 Bimetal sheets in coil forms/ piece parts; Copper clad steel sheets in coil forms / piece parts Relays of contact rating upto 7 amperes
162 28,29 Ammonium Dihydrogen Phosphate ; Ammonium pantaborate Electrolytic Capacitors
163 38 Carbon / Flurographite Powder Potentiometers
164 28,34 Boron Nitride Suspension ; Metallisation Inhabitation Fluid (Oil) Electronic Capacitor Grade metallised Plastic Film/ Plastic Film Capacitors
165 29 Dowanol PX-16S (Non- CFC solvent) Flyback Transformers / Focus Resistors
166 28,29,38,48 Monoalkylethers of ethylene glycol.; Flux 1544 ;Ammonium Hydroxide (CMOS Grade); Ammonia (NH3) (CMOS Grade); Lid perform; Chemcassette Semiconductor devices
167 76 Etched Aluminium Foil Formed Aluminium Foil for electrolytic capacitors.
LIST B
1. 28 Litharge Glass shells/parts for colour picture tubes. parts of cathode ray tubes
2. 28 Gamma Ferric Oxide Magnetic Inks or Magnetic Tape.
3. 38 Precalcined / Pre-sintered ferrite powder Ferrites
4. 58,69,84, 85 Molybdenum Silidde/ Molybdenum disilicide heating elements; conveying trays; saggers Ferrites Capacitors; Resistor
5. OMITTED
6. OMITTED
7. OMITTED
 LIST C
1.   Omitted  
2. Omitted
3. Omitted
4. Omitted
5. 70 TV Glass bulbs/shells; CRT Glass Bulbs/shells; Magnetron Glass bulbs/shells Television picture tubes. Cathode Ray tubes or magnetrons.
6. 70 Glass parts for colour picture tubes (excluding neck or reneck tubes) Colour picture tubes.
7. 70 Parts of TV/CRT Glass bulbs/shells including panels, funnels. Glass tubes (excluding neck or reneck tubes) TV Glass bulbs/shells for TV picture tube or CRT Glass bulbs/shells for CRT.
8 70 Neck or reneck tubes CRT Glass bulbs/shells for CRT.
9.   Omitted  
10. Omitted]